J's Racing Camber Joints S2000 AP1 AP2 Part Number: CAJ-S1-S2Zoom

J's Racing Camber Joints S2000 AP1 AP2 Part Number: CAJ-S1-S2

Item# JSR_Camber_Kit_S2000_AP1_AP2_CAJ_S1_S2
$329.00
Availability: Usually ships in 2-3 business days




Newly designed Jís Racing Camber Joint CAJ-S1-S2

By redesigning the previous model, the new camber joints have been enhanced with the roll center adjuster function in addition to the original negative camber adjustment.



Material : Forged aluminum 6061

The surface is anodized red with a laser carved ĎJís RacingĒ seal

Ball joint S45C

Boll stud SCM435 HB195-260, Fluctuation angle 33 degree all around

The front camber angle can be adjusted to the stock + 3 degree

The front roll center value can be adjusted back to the correct one.

The insufficient negative camber is always a problem for S2000. This product creates enough negative front camber by locating the lower ball joint at an eccentric angle from the center.

The product also corrects the front lower arm position back close to horizontal, so that the correct geometry is restored with the accurately adjusted roll center.

[When you reduce the ride height, the front lower arm position becomes like a separated letter V]

It works in a variety of driving situations from the street to the race track. It is a must-have item for a spirited sport driving with S2000.













Scroll to top